        |
Hollow
|Products| Architectural
doors| Hollow Metal| Designed for high frequency and rugged traffic conditions. Regent and Omega Fire Doors. Honeycomb core. UL, WH, or FM label. Classified for openings rated at up to three hours (class A,B,C,D,E, and 20 minute) which have no temperature rise restrictions. 
Metal Doors
|Stainless Steel| Designer
Glass Collection| |Color/Finishes Gallery| General
Data| Ceco Door| |Email
listing|
Regent combines the aesthetic advantage of a beveled lock edge with the rigidity and impact resistance of Ceco honeycomb core construction. Regent's lock edge is beveled 1/8" in 2" to produce a tight closure clearance. Face sheets are supported by full honeycomb core to assure exceptionally flat surfaces with high structural resistance to impact damage. Regent accepts cylindrical, mortise and unit locks and
is adaptable to other commercial hardware.
Imperial
Handed-as specified
lock edge beveled 1/8" in 2"
cylindrical or mortise lock hardware
For 4-1/2" or 5" standard or heavy weight, full mortise hinges
Omega
non-handed-universal appeal
Square lock edge
cylindrical or mortise lock hardware
4-1/2" standard or heavy weight, full mortise hinges
Versadoor
non-handed-universal appeal
square lock edge
cylindrical or mortise lock hardware
4-1/2" standard or heavy weight, full mortise hinges
Where the versatility of a non-handed door is an important advantage, the Omega offers a honeycomb core construction which can be switched on the job site to right or left handed openings, swing in or out, or as double doors.
A popular distributor door, suited for local conversions. Available with either cylindrical or mortise lock preparations.
Medallion
18, 16, or 14 gauge face sheets, cold-rolled or galvanized.
"R" factor: 1.626
"U" factor: 0.615
"STC" (sound transmission class): 41
Integral flush welded glass lite trim kits
Hinge reinforcement 7 gauge steel (3/16" plate)
12 gauge closer reinforcement plate optional
Galvanized stiffeners options
Maximum Size:
18 or 16 gage: 4'0 x 9'0 single 18 or 16 gage: 8'0 x 9'0 pair. Tested and approved for use Internationally under BS476 Part 22, 1987 (British); SS 332 (Singapore) and various independent Country fire tests for 30, 60, 120, and 240 minutes.